N_031.mp4 «100% SECURE»

: Remove old wires from the terminal block and connect the new assembly.

: Connect a voltmeter to the main board (Black to MP15 , Red to MP4/MP5 ). Adjust potentiometers P4 or P5 to reach exactly 0.500V (500mV) . n_031.mp4

Below is a guide for the assembly and maintenance procedures typically associated with these technical standards. 🏗️ PAT/Hirschmann Crane System Guide : Remove old wires from the terminal block

This guide covers the assembly and adjustment of core components found in the system's technical manuals. 1. Cable Reel & Length Sensor n_031.mp4

: Check the angle display at 20°, 45°, and 70°. The display must be within ±0.5 degrees of the inclinometer reading.