Hold the button on the TV while plugging it back into the outlet; the standby light should begin to blink, indicating the update has started.
: Multi-part RAR files require every single part (part01 through part07) to be downloaded into the same folder before you can successfully extract the firmware. If you are missing part 7, you cannot unzip the file.
: Ensure the firmware is specifically for the 1366x768 resolution. Using firmware meant for a Full HD (1920x1080) panel on your LE32HDS675 can result in a "black screen" or distorted image. Download 358M2C3 1366x768 Leader LE32HDS675 part07 rar
: If your TV is stuck on the logo or restarts repeatedly after an update, it may be in a software boot loop. You might need to perform a hard reset or a manual update via USB to overwrite the corrupted software.
Copy the extracted firmware file to the root directory of the USB drive (do not put it in a folder). Turn off the TV and insert the USB drive. Hold the button on the TV while plugging
: Once you have all parts, extract the .bin or .img file. Ensure your USB drive is formatted to FAT32 . Installation Process :
: If the TV has no standby light or fails to respond to USB updates, the issue may be a hardware failure on the 358M2C3 board rather than just a software fault. Leader TV Support, Australia If you'd like, I can help you: : Ensure the firmware is specifically for the
Find where users share multi-part RAR files for this model.