If your receiver is stuck or you need to downgrade, follow these steps to use the .bin file: Method 1: Standard USB Update a USB drive to FAT32 . Copy the .bin file to the root of the USB drive. Insert the USB into the receiver. Navigate to Menu > Expansion > USB . Select the software file and press OK to begin the update. Method 2: Forced Recovery (If device won't boot)
Are you currently seeing an on the screen (like "SW is wrong" or "Boot")?
Release the button when the screen displays or "UPG" . ⚠️ Important Safety Tips If your receiver is stuck or you need
It is highly recommended to perform a Factory Reset after the update to ensure system stability.
the firmware file to update.bin or GX_rom.bin (depending on your specific chip version). Navigate to Menu > Expansion > USB
Official and community-supported firmware files are generally hosted on the following specialized satellite support sites:
the receiver completely using the back power switch. Insert the USB drive. Release the button when the screen displays or "UPG"
Check swdw.net or cwdw.net for the latest official software lists.